1948 Johnson TD 20, 5 HP

Home › Forum › Ask A Member › 1948 Johnson TD 20, 5 HP

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 14, 2015 at 12:22 pm #1488
    conrad-miller
    Participant

      I’m having trouble with a carburetor, on the primer pump, I need to know how to get a hold of the gentleman who makes the leather O-ring, or or seals for the primer pump, can someone please tell me how I may get a hold of the gentleman who makes them, thank you

      May 14, 2015 at 12:52 pm #15940
      mercuryman
      Participant

        I made a seal from a grommet I found one just the size of the barrel and sliced it in half. Then i drilled out the hole a little smaller than the plunger. The spring will hold it in place and it worked no leaks.

        May 14, 2015 at 6:57 pm #15957
        Mumbles
        Participant

          Lloyd is the fellow who makes the seals but he is quite ill right now and needs his rest.

          Here’s another source for them and some good instructions for installing them and working on these carbs.

          http://www.effenaco.com/store3/viewitem … oductid=28

          http://pochefamily.org/outboard/CarbService.html#

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.