Re: 1937 Thor built Sea King 2.4 hp This and That
Home › Forum › Ask A Member › 1937 Thor built Sea King 2.4 hp This and That › Re: 1937 Thor built Sea King 2.4 hp This and That
March 27, 2018 at 3:14 pm
#73111
quote Buccaneer:
The finished bushing walls will only be 1/16″ thick,
so indeed, the groove won’t be very deep.
I have some 660 bronze hollow tube coming,
1/2″ hole, 1″ OD.
so indeed, the groove won’t be very deep.
I have some 660 bronze hollow tube coming,
1/2″ hole, 1″ OD.
Are your bronze bushings thinwall and pressed into a carrier? Mine were solid with no oil groove and had to be made out of 1.5" and 1.25" stock.
I better not give up on this project as I probably paid more for the 660 than I did for the motor itself!