Home › Forum › Ask A Member › 1967 E-rude 6hp 6702S › Re: 1967 E-rude 6hp 6702S
June 8, 2018 at 10:53 pm
#77681
Couple more things you need to do. Remove spark plugs. Then slowly rotate the flywheel as you lower the gearcase. There is a pin through the drive shaft that must align with a slot to allow it to come down. Once you find it, do not move the flywheel again till the lower unit is back up in place. Also note the position of the pin so you can pre-align it before reinstallation.