Re: Help troubleshoot my ’58 fisherman

Home Forum Ask A Member Help troubleshoot my ’58 fisherman Re: Help troubleshoot my ’58 fisherman


fleetwin

US Member - 2 Years
Replies: 4737
Topics: 46
#79244

OK, I see what you did…Once the vertical rod was out, you must have advanced the throttle tiller which allowed the two gears to spin out of each other.
I think you can get it back together without removing the horizontal shaft/gear….First, remove the vertical throttle rod again, only takes a couple of minutes. Now align the first teeth of horizontal and vertical gears by retarding the tiller control and vertical gear until the first teeth of each is lined up. Now simply retard the tiller throttle control which will draw the gears in, then reinstall the vertical throttle rod….
You will need to "rebend" that SS clamp that holds the vertical throttle rod and mag plate arm together or the mag plate arm will just pop off the vertical throttle shaft….