Home › Forum › Ask A Member › 1973 Evinrude 9.5hp › Re: 1973 Evinrude 9.5hp
October 23, 2018 at 2:54 am
#84847
no spark could be just a bad stop switch . try the easy route first
try disconnecting the two wires clips from the kill switch and retest for sparks
if ok then the switch is shorted internally
just take it out open it up and clean the innards (small metallic cup corrodes so just shine it up add a touch of oil remount & reconnect the 2 clips on the side and retest for sparks
Joining AOMCI has priviledges 🙂