Recommendations for the best outboard to officiate a wedding

Home › Forum › Ask A Member › Recommendations for the best outboard to officiate a wedding

Viewing 10 posts - 1 through 10 (of 23 total)
1 2 3
  • Author
    Posts
  • February 17, 2017 at 9:46 pm #6368
    johnyrude200
    Participant

      So the fiance has finally come around – due to the AOMCI influence an outboard will officiate our wedding.

      It will be in bucket at idle, the vows will be exchanged, and the response will be as follows:

      Forward = YES
      Reverse = NO
      Neutral = THINKING

      Best motors to officiate? Recommendations – please provide your reasoning too. The winner will receive an honorary medal.

      February 17, 2017 at 10:07 pm #53167
      mr-asa
      Participant

        To make it legal, you might have to have a notary operating the motor.

        To make my decision I need some background info, how old are the both of you, and how old were you when you met each other?

        February 17, 2017 at 10:11 pm #53168
        RICHARD A. WHITE
        Participant

          Lifetime Member

          Hands down…Evinrude Big Four…why? Forward only baby!!!!!!!!!!!!

          http://www.richardsoutboardtools.com
          classicomctools@gmail.com

          February 17, 2017 at 10:34 pm #53170
          johnyrude200
          Participant

            Mid to late 30’s (age)
            early 30’s (met)

            February 17, 2017 at 10:50 pm #53171
            stanley
            Participant

              US Member - 2 Years

              Something from mid-seventies.Vow to hold hands and watch it run when it turns 100yrs old.

              February 17, 2017 at 11:06 pm #53172
              johnyrude200
              Participant

                good one stanley! Richard – let’s keep in mind that some of the direct drive motors can be rotated backwards, for reverse/NO!!!!!

                February 17, 2017 at 11:21 pm #53174
                RICHARD A. WHITE
                Participant

                  Lifetime Member

                  Not this one…..

                  http://www.richardsoutboardtools.com
                  classicomctools@gmail.com

                  February 17, 2017 at 11:56 pm #53177
                  fisherman6
                  Participant

                    US Member - 2 Years

                    Definitely NO reverse on a BigFour. You got to have your thinking taken care of and be in right general direction before you start that one! Sounds appropriate so far.
                    -Ben

                    OldJohnnyRude on YouTube

                    February 18, 2017 at 12:05 am #53178
                    RICHARD A. WHITE
                    Participant

                      Lifetime Member
                      quote Fisherman6:

                      Definitely NO reverse on a BigFour. You got to have your thinking taken care of and be in right general direction before you start that one! Sounds appropriate so far.
                      -Ben

                      Which is exactly WHY it is the perfect motor, like a marriage, you must first make sure you have a chosen direction, make sure you have a suitable plan, and remember it could be a rough ride, until you get used to how she likes to be handled, but then it can and most certainly will be one of the most memorable rides of your life… once you realize you never really are meant to control her completely.

                      http://www.richardsoutboardtools.com
                      classicomctools@gmail.com

                      February 18, 2017 at 12:14 am #53179
                      Steve A W
                      Participant

                        US Member - 2 Years

                        Wow Richard I never knew you were such a philosopher ❗ ❗
                        The best part is, Your right.

                        Steve A W

                        Member of the MOB chapter.
                        I live in Northwest Indiana

                      • Author
                        Posts
                      Viewing 10 posts - 1 through 10 (of 23 total)
                      1 2 3
                      • You must be logged in to reply to this topic.