Condenser to coil matching

Home › Forum › Ask A Member › Condenser to coil matching

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 25, 2017 at 2:12 am #6183
    RICHARD A. WHITE
    Participant

      Lifetime Member

      Here is one…
      I have a Neptune twin,
      Wico coil 3040D
      tests good both sides
      Condenser…. no numbers on this condenser
      So not able to test as I do not know what it should be.
      Mag is a Wico P2934A
      Spec. FW1102
      Serial 043825

      Any thoughts on what condenser I can use???

      http://www.richardsoutboardtools.com
      classicomctools@gmail.com

      January 25, 2017 at 2:47 am #51663
      Mumbles
      Participant

        Year? Model? I think another make used that same coil and the cap was rated around .16-.18 uF. Not sure though.

        January 25, 2017 at 3:35 am #51669
        wagemaker
        Participant

          http://www.oldengine.org/members/diesel … Parts2.htm
          Shows your magneto has an x2186 condenser.

          http://www.oldengine.org/members/diesel … agCap1.htm
          shows that X2186 condenser is .16 – .20

          That first link has other outboard models too.

          January 25, 2017 at 11:05 am #51683
          RICHARD A. WHITE
          Participant

            Lifetime Member

            I can’t get those links to work here at work, but I do have a cap that fits that range…It is from a Neptune so that will be my back up..

            Thanks guys 🙂

            http://www.richardsoutboardtools.com
            classicomctools@gmail.com

            January 25, 2017 at 11:08 am #51684
            RICHARD A. WHITE
            Participant

              Lifetime Member

              quote Mumbles:

              Year? Model? I think another make used that same coil and the cap was rated around .16-.18 uF. Not sure though.

              Not sure which model or year as it is someone else’s motor. It was at our meet last weekend and he stated he had no spark and suspected the coil.
              Offered to look it over, coil is like brand new, points were filthy, and the cap I have no clue as it had no identifiers.

              So with this new knowledge, I will test that cap at the .16-.2 ish range and see if it is ok.

              http://www.richardsoutboardtools.com
              classicomctools@gmail.com

              January 25, 2017 at 6:39 pm #51719
              pm-t2
              Participant

                Canada Member - 2 Years

                Did you test the condenser to see what capacity it measures?

                January 25, 2017 at 8:35 pm #51727
                RICHARD A. WHITE
                Participant

                  Lifetime Member
                  quote PM T2:

                  Did you test the condenser to see what capacity it measures?

                  Yes, got a reading of .21 mfd, but not knowing what the actual part number of the condenser was I had no way of knowing if it was right.

                  Now I do, so time to reinstall and test for spark this weekend.

                  http://www.richardsoutboardtools.com
                  classicomctools@gmail.com

                • Author
                  Posts
                Viewing 7 posts - 1 through 7 (of 7 total)
                • You must be logged in to reply to this topic.