Home › Forum › Ask A Member › 1959 lark 35hp questions › Re: 1959 lark 35hp questions
August 9, 2017 at 3:05 pm
#62724
quote VinTin:
There are adjustments either on the connector from the roller to the throttle butterfly or under the flywheel the machine screws that hold the brass cam in place. You need to adjust until the throttle butterfly is just beginning to open when the roller lines up centered on the hash mark on the brass cam. It is way off!
NO! you have it lined up properly. The butterfly should just start to open when the arrow to the left of the roller hits the mark on the cam. Adjust it by loosening the bolts on the cam and adjusting the cam in and out to make it so. You need to replace that roller – it is heavily grooved which can throw timing off.
