Sparkplug question

Outboard Related Only
ryanjames170
Posts: 108
Joined: Tue Aug 01, 2017 12:19 am
Location: Hayward WI

Re: Sparkplug question

Postby ryanjames170 » Sat Aug 12, 2017 10:13 am

I have had bad champions before but they were Briggs brand ones and resistor plugs.. I hatend resister plugs on any power equipment
Mercury/OMC guy..

3 Merc's
4 johnson's
1 Hiawatha/Gale

User avatar
Tubs
Posts: 1437
Joined: Thu Mar 12, 2015 7:47 am

Re: Sparkplug question

Postby Tubs » Sat Aug 12, 2017 11:09 am

I had several Champions fail in motorcycles years
ago. Switched to AC and never had any more
problems. Don't ever remember a Champion failing
in a car but when the time came to change them I
switches AC's. Had a new Champion start missing
in a Super Elto a couple years ago. I was away
from home and the place I went had AC's that
crossed over. I took all they had. I've run a Mercury
with the Bendix ignition a lot this year. AC's didn't
cross over so I used Champions and never had a
problem. I don't have the motor anymore but
if was to have had a problem I would have tried
NKG's.
Image Image Image Image

westwind
Posts: 254
Joined: Sat Mar 14, 2015 8:23 am
Location: Ontario, Canada
Contact:

Re: Sparkplug question

Postby westwind » Sat Aug 12, 2017 2:04 pm

NGK B6S is a good choice for a Champion J6C or J8C replacement. Never had a problem even though it covers two Champion heat ranges. Great plugs.
Member of the http://uppercanadachapteroftheaomci.yolasite.com/

Image

Great Northern Chapter Member


Return to “Ask A Member”

Who is online

Users browsing this forum: Bing [Bot] and 8 guests