1948 3.3HP Evinrude Parts Diagram

Outboard Related Only
kevinrude
Posts: 333
Joined: Sun Mar 15, 2015 11:26 am
Location: SouthEast Michigan
Contact:

1948 3.3HP Evinrude Parts Diagram

Postby kevinrude » Thu Jan 11, 2018 12:53 pm

Hey guys,

Does anyone have a parts diagram for a 1948 3.3HP Evinrude? I looked in all of the usual places and couldn't find one.

Thanks!

Regards,
Kevin

User avatar
Buccaneer
Posts: 2521
Joined: Mon Mar 09, 2015 9:34 pm

Re: 1948 3.3HP Evinrude Parts Diagram

Postby Buccaneer » Thu Jan 11, 2018 2:32 pm

There's some on this site if you search for 4423.

User avatar
Garry in Tampa
Posts: 2568
Joined: Mon Mar 09, 2015 2:32 pm
Location: Florida

Re: 1948 3.3HP Evinrude Parts Diagram

Postby Garry in Tampa » Thu Jan 11, 2018 4:53 pm

It's in my DropBox Account - - - :lol:
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Living my dream because Reality is too expensive . . .

kevinrude
Posts: 333
Joined: Sun Mar 15, 2015 11:26 am
Location: SouthEast Michigan
Contact:

Re: 1948 3.3HP Evinrude Parts Diagram

Postby kevinrude » Thu Jan 11, 2018 5:23 pm

Sweet. Thanks Garry!

Chipster303
Posts: 14
Joined: Thu Jan 04, 2018 3:09 pm

Re: 1948 3.3HP Evinrude Parts Diagram

Postby Chipster303 » Fri Jan 12, 2018 3:50 pm

Sounds like you are working on one also, kevinrude. I am restoring one myself. Just gathering parts as I experience the need. Hope to find enough parts to get it going. Good luck with yours and let me know if I can help in any way.

Chip

rjoynt
Posts: 136
Joined: Tue Mar 24, 2015 7:57 pm
Location: Brown's Town (Cleve OH)

Re: 1948 3.3HP Evinrude Parts Diagram

Postby rjoynt » Fri Jan 12, 2018 9:05 pm

Hey Chip. I have one on the rack. Maybe time to pull it off of the rack and work on it during this cold Ohio winter! Brrrrrr.....

bookfuzz
Posts: 39
Joined: Thu May 04, 2017 8:58 am
Location: Milwaukee

Re: 1948 3.3HP Evinrude Parts Diagram

Postby bookfuzz » Wed Jan 17, 2018 11:41 am

Want to thank Gary in Tampa for the posting of the 3.3 hp. I just acquired one in nice shape but needed that info.

skanders01
Posts: 69
Joined: Sat Sep 10, 2016 10:47 am
Location: Green Bay, WI

Re: 1948 3.3HP Evinrude Parts Diagram

Postby skanders01 » Thu Jan 18, 2018 6:44 am

Came across one of these for pretty cheap that is intact, started and ran OK last year. Won't start now, so I am starting with a carb kit if I can find one. When I broke it down the float/chamber was full of small cork (float) particles clogging up the works. Float was not protected with any coatings. Any of you rebuilders find a good source for a carb repair kit?

Thanks,

Kyle
Kyle Anderson
DePere, WI
920-532-6229
skanders@new.rr.com

User avatar
Garry in Tampa
Posts: 2568
Joined: Mon Mar 09, 2015 2:32 pm
Location: Florida

Re: 1948 3.3HP Evinrude Parts Diagram

Postby Garry in Tampa » Thu Jan 18, 2018 8:25 am

The float was coated with lacquer, which is disolved by the alcohol in todays fuel. Sorry - no carburetor kits, you have to order the individual parts, Old stock floats would have to be resealed . . . :)
Image
Living my dream because Reality is too expensive . . .

crosbyman
Posts: 941
Joined: Tue Mar 10, 2015 11:39 pm
Location: Montreal Canada

Re: 1948 3.3HP Evinrude Parts Diagram

Postby crosbyman » Thu Jan 18, 2018 8:52 am

that float "looks" like the TN27 float..... could the mercury float be used ?

Dan had suggested the following ... (My TN27 float was in great shape so I am just going to reseal it for now)


Get you a Sierra #18-7208 float. Same as Mercury #1395-8673. Works great & you don't have to coat it or anything. Slight modifications. Just drill out the center to remove the little spring for the center rod & add the hole for the screw to hold the plate to set float heigth. Best way to go & cheap.


Return to “Ask A Member”

Who is online

Users browsing this forum: david bartlett, Garry in Tampa and 3 guests