need Impellers for an Evinrude 4423 -- 3.3 hp

Outboard Related Only
bookfuzz
Posts: 39
Joined: Thu May 04, 2017 8:58 am
Location: Milwaukee

need Impellers for an Evinrude 4423 -- 3.3 hp

Postby bookfuzz » Wed Jan 17, 2018 11:45 am

Evinrude 3.3 hp Impellers don't seem to have a modern model number equivalent that I can find.
Any help to find a couple would be nice.
Have not ripped it open yet but am making some assumptions that I will need parts.

FrankR
Posts: 3259
Joined: Tue Mar 10, 2015 6:32 pm
Location: Florida

Re: need Impellers for an Evinrude 4423 -- 3.3 hp

Postby FrankR » Wed Jan 17, 2018 12:50 pm

Part number 202278. Google it. Or try these guys to see if they make them:

Brian Wilcox. Call 810-794-7685 before 8 pm est please.Or email Baron0418@att.net. please note the b must be a capital.

OR

http://home.earthlink.net/~flyingscott/

User avatar
twostroke
Posts: 151
Joined: Fri Sep 15, 2017 12:34 pm
Location: Central Lower MI

Re: need Impellers for an Evinrude 4423 -- 3.3 hp

Postby twostroke » Wed Jan 17, 2018 1:07 pm

There's a NOS pair on ebay....but they're kinda' valuable.

https://www.ebay.com/itm/0202278-OMC-Ev ... IX&vxp=mtr
I say "Pardon Me" a lot. I had a 20H with a toilet bowl, then raced open mod sleds. :D

bookfuzz
Posts: 39
Joined: Thu May 04, 2017 8:58 am
Location: Milwaukee

Re: need Impellers for an Evinrude 4423 -- 3.3 hp

Postby bookfuzz » Wed Jan 17, 2018 9:03 pm

thanks very much. had the part number but was looking for a modern replacement.
Will check the other info given.

FrankR
Posts: 3259
Joined: Tue Mar 10, 2015 6:32 pm
Location: Florida

Re: need Impellers for an Evinrude 4423 -- 3.3 hp

Postby FrankR » Wed Jan 17, 2018 9:06 pm

There ain't no modern replacement. Your best bet is a reproduction, if either of those guys make them.

bookfuzz
Posts: 39
Joined: Thu May 04, 2017 8:58 am
Location: Milwaukee

Re: need Impellers for an Evinrude 4423 -- 3.3 hp

Postby bookfuzz » Wed Jan 17, 2018 9:08 pm

Thanks

User avatar
Garry in Tampa
Posts: 2570
Joined: Mon Mar 09, 2015 2:32 pm
Location: Florida

Re: need Impellers for an Evinrude 4423 -- 3.3 hp

Postby Garry in Tampa » Wed Jan 17, 2018 9:46 pm

They were sixty cents each in 1963 . . . :lol:
Image
Living my dream because Reality is too expensive . . .

User avatar
Mumbles
CYBER SHERIFF
Posts: 3719
Joined: Mon Mar 09, 2015 3:42 pm
Location: Victoria BC

Re: need Impellers for an Evinrude 4423 -- 3.3 hp

Postby Mumbles » Wed Jan 17, 2018 9:55 pm

Garry in Tampa wrote:They were sixty cents each in 1963 . . . :lol:


About $4.76 in todays coin. :?
Still searching for a rudder and hardware to fit a KOBAN. ☺

Member of the http://uppercanadachapteroftheaomci.yolasite.com/


Return to “Ask A Member”

Who is online

Users browsing this forum: No registered users and 10 guests