Home › Forum › Ask A Member › 35HP – Exhaust cover gasket question › Re: 35HP – Exhaust cover gasket question
September 6, 2018 at 1:15 am
#82334
You should use a gasket sealer for the exhaust cover gaskets. I use either BRP Gasket Seal Compound or Permatex Aviation Gasket Sealer #3. Yes, look for pinholes, burn-throughs or pitting on the inner plate. Might also lay the plate on a known flat surface and check for warpage.
Bob
1937 Champion D2C Deluxe Lite Twin
1954 Johnson CD-11
1957 Evinrude Fastwin 18
1958 Johnson QD-19
1958 Johnson FD-12
1959 Johnson QD-20
“Every 20 minute job is only a broken bolt away from a 3-day project.”
"Every time you remove a broken or seized bolt an angel gets his wings."