1925 Johnson A-25

Outboard Related Only
John C
Posts: 342
Joined: Thu Sep 03, 2015 1:32 am

1925 Johnson A-25

Postby John C » Sun Mar 11, 2018 10:37 pm

The weather here was good today so ran some motors. This Johnson A-25 started right up after sitting for several years. Noticed the prop and nut missing after removing motor from test barrel. The prop shaft isn't drilled for a cotter key to hold the prop nut in place. How do I keep from losing that nut when I run the motor?

User avatar
Mumbles
CYBER SHERIFF
Posts: 3988
Joined: Mon Mar 09, 2015 3:42 pm
Location: Victoria BC

Re: 1925 Johnson A-25

Postby Mumbles » Mon Mar 12, 2018 1:51 am

The operators manual says there should be two nuts, a flat one and a locking acorn nut.
Attachments
J A.JPG
J A.JPG (88.37 KiB) Viewed 229 times

John C
Posts: 342
Joined: Thu Sep 03, 2015 1:32 am

Re: 1925 Johnson A-25

Postby John C » Mon Mar 12, 2018 3:13 am

Thanks Mumbles. That makes sense.


Return to “Ask A Member”

Who is online

Users browsing this forum: Bullie, Garry in Tampa, NJ-boatbuilder57, Treeguy and 9 guests