Alumacraft oars

Home › Forum › Ask A Member › Alumacraft oars

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 9, 2018 at 8:20 pm #10207
    twostroke
    Participant

      I finally found a set of Alumacraft aluminum oars (that I could afford) for my Alumacraft ‘G’. They’re in good shape other than the wood handles…. I’m in the process of sealing them with fiberglass resin so I can fill ’em and make them ‘true’. Does anyone out there know what color they originally were?

      Thanks!

      Jim

      I say "pardon me" a lot. I had a 20H, then raced open mod sleds.

      June 9, 2018 at 8:32 pm #77721
      pm-t2
      Participant

        Canada Member - 2 Years

        mine are natural wood that is stained and varnished. Not painted.

        Hope this helps.

        Best,
        PM T2

        June 9, 2018 at 8:47 pm #77722
        twostroke
        Participant

          Thanks, Chris… I was afraid of that. These are far too ‘gone’ to clear finish, unfortunately. I’ll ‘mud’ these up and paint ’em for the summer, and see if my Furniture Nazi buddy will turn me out a pair of replacements on his lathe at a later date.

          Jim

          I say "pardon me" a lot. I had a 20H, then raced open mod sleds.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.