Re: 1973 Evinrude Mate 2HP Issues
Home › Forum › Ask A Member › 1973 Evinrude Mate 2HP Issues › Re: 1973 Evinrude Mate 2HP Issues
April 3, 2018 at 10:40 am
#73393
Good catch Bill! You are probably right, with these rust/pits, the engine will probably run, but will be hard to start and won’t idle…
OK, so you have found an .030" piston and rings…The big deal here is getting the cylinder bored out to .030" properly. I would not let just anyone do this for you, you may want to contact Dan Anderson aka t2stroke…
Don