Re: If I have a wiring error, I simply can’t find it…

Home › Forum › Ask A Member › If I have a wiring error, I simply can’t find it…UPDATE: FIXED! › Re: If I have a wiring error, I simply can’t find it…

February 12, 2018 at 3:28 am #70916
nj-boatbuilder57
Participant

    Not a lanyard, but the same idea…..It’s the kill (shorting) contacts on the ignition switch, per the schematic above.

    I am completely stumped. The points are shorted together (confirmed with my DMM at 0.6 ohms), and yet the top cylinder continues to spark when cranking.