Re: Johnson Starter
Home › Forum › Ask A Member › Johnson Starter › Re: Johnson Starter
February 8, 2018 at 12:40 am
#70785
Hi OB3,
I have the same motor. If your’s is truly a FDE-11, then there should be a bracket on the front left side of the powerhead with a circular hole for the starter. This bracket also has a bumper for the cowl. Other signs are the geared starter flywheel, and the lower front cowl pan should have a 3 prong connector for the external starter relay box.
The starter motor bolts to this bracket, and there is also a large rubber gasket/damper probably for vibration isolation.
I can post photos if it helps, but mine is out being blasted right now.