Home › Forum › Ask A Member › Shift linkage on a 57 bell boy with 57 Johnson 35 hp › Re: Shift linkage on a 57 bell boy with 57 Johnson 35 hp
March 15, 2018 at 8:34 pm
#72536
Something I’ve seen dozens of times: The inner core wire in the control cables breaks at the screws that hold the ends on. So somebody simply re-attaches the end to what’s left of the inner core wire (which by now is about 3/4" too short). That reduces the travel of the cable end by a like amount. Then it doesn’t have enough travel to go all the way between forward and reverse.
Moral: Back in "The Day". we used to replace the core wire. Nowadays, just replace the cable.