Home › Forum › Ask A Member › 1936 Evinrude Fisherman › Re: 1936 Evinrude Fisherman
March 23, 2018 at 10:13 pm
#72926
Tom, That’s what I did, a good clean up of the whole ignition deck and components,( capacitor measures 250nF (.25uF)) and we have spark! Both sides! Good advice, thanks!
A bit of release-all in each cylinder for a soak, and pulled the lower unit (felt a bit rough). Very little grease in there, and consistency of beeswax…. A scrape and wash out, and a temporary testing repack with chassis grease (just until I can run up the valley and get some corn head grease) and she now spins over quite nicely. Might just try to fire her up this weekend….
😉
R