Re: Install starter brushes into Autolite MDH 4001M
Home › Forum › Ask A Member › Install starter brushes into Autolite MDH 4001M › Re: Install starter brushes into Autolite MDH 4001M
April 11, 2018 at 2:03 am
#73784
Electrical starter and alternator rebuilding shops have a electric spot welder to attach the brush leads. I have replaced many. Very easy to do, with the right equipment. These have a problem that shows up on a regular basis. When tightening and loosening the positive cable, the post moves and then the field winding connection to the post on the inside of the starter breaks. It is also repaired using the spot welder.