Re: 1975 Evinrude Mate
Home › Forum › Ask A Member › 1975 Evinrude Mate › Re: 1975 Evinrude Mate
August 25, 2018 at 5:10 am
#81741
I have the same motor from a few years later, and it runs fine at idle with 105psi. I had to rebuild the carb and clean and reset things under the flywheel, and it runs great. I agree with others on here, it may be a fuel flow problem. You may also get a bump in PSI after you run it a while. I did do the Seafoam treatment also, and it helped with compression.