Johnson QD-17

Home › Forum › Ask A Member › Johnson QD-17

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 18, 2015 at 10:56 am #1525
    shoestringmariner
    Participant

      Going to look at a 1956 Johnson QD-17. Anything I should be aware of or look for with these? Owner will let me do a compression test. I’m expecting coils needing replacement & the usual revival stuff…but is there anything else to look for?

      May 18, 2015 at 12:35 pm #16316
      frankr
      Participant

        US Member

        Loose wrist pins. Check them while you have the plugs out.

        May 18, 2015 at 1:21 pm #16320
        fleetwin
        Participant

          US Member - 2 Years

          OK, this 10hp has the larger 18hp style gearcase, which is a good thing. Ask the owner if you can crack the lower gearlube drain screw to check for water. And, like Frank says, check for loose/sloppy wrist pins. Ask the owner what fuel/oil mixture he is using, if he says 50:1, you might be concerned.
          These are pretty solid engines, other than possible wrist pin issues. Be sure to check the normal stuff, look for bent/cracked castings, signs of overheating, etc.

          May 18, 2015 at 3:55 pm #16353
          shoestringmariner
          Participant

            excellent, thanks much guys!

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.