Big Rich’s 2 Spark coils

Home › Forum › Ask A Member › Big Rich’s 2 Spark coils

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • October 28, 2023 at 7:39 pm #282123
    GravelyShoals
    Participant

      I ordered two of Big Rich’s ‘2 Spark’ coils. He says there is an article on here somewhere about how to use these on an Oliver made Wizard 5.5 HP. Anyone know about this? Thanks in advance

      October 28, 2023 at 7:50 pm #282124
      GravelyShoals
      Participant

        He mentioned an article in a recent issue of the Antique Outboarder magazine but not sure which issue

        October 30, 2023 at 7:06 pm #282157
        RICHARD A. WHITE
        Participant

          Lifetime Member

          I do not know if anyone has created a list of what articles are in which Outboarder…. I have installed them in Chris Craft challengers, and I am pretty sure they will fit many others… I use them in my reproduction Elto Coil housings…. I do know that the spark plug terminals are NOT in the same orientation as the originals, so that requires a bit resourcefullness to make them work but it can be accomplished.

          http://www.richardsoutboardtools.com
          classicomctools@gmail.com

          1 user thanked author for this post.
          GravelyShoals
          November 5, 2024 at 6:32 pm #291909
          GravelyShoals
          Participant
            GravelyShoals wrote:

            He mentioned an article in a recent issue of the Antique Outboarder magazine but not sure which issue

            I found a supplier who is actually reproducing the Bendix Scintilla coils. He’s in Wood Dale Illinois

            November 5, 2024 at 6:34 pm #291910
            GravelyShoals
            Participant

              Thanks Richard! Im not used to this message board here and how to know when someone replys

              November 5, 2024 at 6:35 pm #291911
              GravelyShoals
              Participant

                Richard, it only took me 13 months to see you replied! Lol ☺️. Its Doug Parker in AuGres Michigan by the way 🤣

                November 5, 2024 at 6:50 pm #291912
                joecb
                Participant

                  US Member

                  Hello Doug in AuGres… See my article in January 2024 issue , page 21. I hope that that helps.

                  Joe B here in Farmington Hills, MI

                  November 5, 2024 at 10:45 pm #291927
                  labrador-guy
                  Participant

                    US Member

                    Good to hear from you Doug!  Hope you got that Mark 10 going.  It has been a while since I talked to you.  There is a wealth of information on this website.

                    dale

                  • Author
                    Posts
                  Viewing 8 posts - 1 through 8 (of 8 total)
                  • You must be logged in to reply to this topic.