Product , method to dissolve / remove burnt carbon

Home › Forum › Ask A Member › Product , method to dissolve / remove burnt carbon

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 7, 2024 at 8:10 am #286544
    T….in Wisconsin
    Participant

      US Member

      Requesting feedback on what has worked well for removing burnt carbon from exhaust manifolds & pistons, etc.

       

      T.. in Wisconsin

      April 7, 2024 at 8:50 am #286546
      Buccaneer
      Participant

        US Member

        I think some people use oven cleaner.
        After it soaks a while, the carbon should
        come off easy with mechanical means.

        Prepare to be boarded!

        1 user thanked author for this post.
        T....in Wisconsin
        April 7, 2024 at 11:19 am #286547
        joecb
        Participant

          US Member

          Oven Cleaner… but caution as it will attack aluminum if left on too long.. will also attack you, use appropriate protective measures

           

          Joe B

          1 user thanked author for this post.
          T....in Wisconsin
          April 7, 2024 at 1:58 pm #286549
          rmhxruss
          Participant

            Try these. OMC BuRP carbon guard. Yamaha ring free. Chevron techroline. All the same basic product. Made by Chevron.

            1 user thanked author for this post.
            T....in Wisconsin
          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.