- This topic has 9 replies, 4 voices, and was last updated 2 months, 2 weeks ago by
.
Viewing 10 posts - 1 through 10 (of 10 total)
-
After some studding O ring charts, I found that the Dash # is 223 for this O ring for anyone the may find this usfull. Tubs
My O-ring kit has “R” numbers. Not sure if there’s a cross
reference to “dash” numbers on McMaster, etc.?
Prepare to be boarded!
My O-ring kit has “R” numbers. Not sure if there’s a cross
reference to “dash” numbers on McMaster, etc.?
Prepare to be boarded!
Its winter service time here where the temp gets below freezing. This is my back up motor. When ever running a motor for the first few times its in the boat if needed. It gets run some every year weather its need or not and this year it was needed. I may post that motors issue at another time. Checking the lower this year I had some water. Being somewhat frugal I downloading a chart in fractions, and a chart in decimals, which was confusing as 1/8″ is 0.139 on the decimal chart. After a considerable amount of measuring and studying I made an investment of $.79 to confirm that the Dash # 223 – O ring is a match for # 301917 IMO. Tubs
The As 568 is the dash # for the O rings in your assortment. Tubs
My O-ring kit has “R” numbers. Not sure if there’s a cross
reference to “dash” numbers on McMaster, etc.?
Viewing 10 posts - 1 through 10 (of 10 total)
- You must be logged in to reply to this topic.
