1926 Jobhnson AB-25 Gas oil

Home › Forum › Ask A Member › 1926 Jobhnson AB-25 Gas oil

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 12, 2019 at 6:05 pm #177185
    muddog2
    Participant

      I am going to try to start my motor Friday afternoon. I believe I was told I can use the same oil that you mix for any 2 cycle engine made today. I know that I am to mix 1/2 pint per gallon for this motor. I just want to make sure that I use the right oil.
      Thanks, Robert Clark

      100_8355

      • This topic was modified 4 years, 10 months ago by Mumbles.
      June 12, 2019 at 9:20 pm #177191
      bobw
      Participant

        US Member

        You should use a TCW rated oil made for outboards, not the 2 cycle oil used for air cooled weed eaters or leaf blowers.

        Bob

        1937 Champion D2C Deluxe Lite Twin
        1954 Johnson CD-11
        1957 Evinrude Fastwin 18
        1958 Johnson QD-19
        1958 Johnson FD-12
        1959 Johnson QD-20

        “Every 20 minute job is only a broken bolt away from a 3-day project.”
        "Every time you remove a broken or seized bolt an angel gets his wings."

        June 12, 2019 at 9:47 pm #177194
        muddog2
        Participant

          wall mart sells a tc-w3 outboard 2 cycle engine oil by the gallon. Is the the correct oil
          Thanks for any help.

          June 12, 2019 at 9:51 pm #177195
          bobw
          Participant

            US Member

            Yes. Don’t know how much you intend to use/run that motor but a gallon of oil will last you a long time. You can buy pint bottles at Walmart as well.

            Bob

            1937 Champion D2C Deluxe Lite Twin
            1954 Johnson CD-11
            1957 Evinrude Fastwin 18
            1958 Johnson QD-19
            1958 Johnson FD-12
            1959 Johnson QD-20

            “Every 20 minute job is only a broken bolt away from a 3-day project.”
            "Every time you remove a broken or seized bolt an angel gets his wings."

            June 12, 2019 at 9:58 pm #177196
            muddog2
            Participant

              Great, I plan to use it as my primary motor for my 14′ aluminum boat to take my grandson fishing along with a 36lb thrust trolling motor. Mainly using the Johnson to get to and from fishing ares. I will get the pint first and see how thing go Friday when I try to start it. I have spark and compression so I am sure it will run.
              Thanks again for the info.
              Robert Clark

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.