Home › Forum › Ask A Member › 1928 Evinrude Fastwin decals
- This topic has 7 replies, 4 voices, and was last updated 2 years, 5 months ago by davidk.
-
AuthorPosts
-
August 18, 2022 at 6:40 am #264527August 18, 2022 at 7:20 am #264534
IMHO, the light blue decal is definitely not correct. The other one is closer, but the silver background behind “Evinrude” in all decals should be light grey with slightly darker gray stippling. The serif on the “F” should go behind the V of Evinrude. I can’t be sure, but I believe the color of “Evinrude” is not such a deep blue, more blue with grey, kind chalky. On the side decals, the block behind the lightning bolts should have wavy lines. Interestingly, the gold background decal with the S&O instructions is more like the original than the one that came with the other set with the silver background, but I can’t verify what it says to know whether it’s the correct one for the ’28 Fastwin.
That said, nice motor! If you haven’t opened it up, consider doing so. Check the pistons for cracks or chips and check the piston pin retaining hardware. I think you already know about the water tube fittings. Are you getting good cooling with that prop? Trying to outrun Bill and Lincoln?
T
August 18, 2022 at 10:58 am #264546Thanks for your input, Tom. Good thing I’m not doing this for a museum. I like the look of the set I went with. The blue decal doesn’t even fit above the tabs on the tank. Maybe I’ll put it on my Prius?
I haven’t run this motor on a boat yet. Maybe this weekend? I’ll let you know how that goes.
Bring your high speed film to the Fall Saco River Meet! : )
August 18, 2022 at 1:57 pm #264553David,
When is the Fall meet at Saco? My dance card is filling up fast.
T
August 18, 2022 at 2:01 pm #264554David,
When is the Fall meet at Saco? My dance card is filling up fast.
T
Not set yet. Pester Bill and Lincoln about it.
August 19, 2022 at 8:21 pm #264569The decal with the blue background was produced by a now deceased member years ago to “fill the gap” for motors needing decals. The original Evinrude decal has a lot of minute detail that back in the day was difficult to reproduce economically. So many people wanted water-applied decals, and those minute details are difficult to reproduce on water-applied. Now with vinyl and newer printing techniques, high quality reproductions are a lot easier to make. I have a friend in AOMCI who has been on the club way longer than most and he spent considerable money having a print shop analyze an original 1929 and determine what the original colors were prior to the effects of many years of oil, gas, sunlight and abuse, that change the appearance. The original Fastwin and Speeditwin had the silver background with fish scales……extremely difficult to economically reproduce. Notice the fish scales are not symmetrical on this original 1930 Evinrude decal. Neither are the ones on the decal my friend had reproduced. The reproduced one is for the 28/29 version.
George
1 user thanked author for this post.
August 19, 2022 at 11:11 pm #264588
Tubs.A "Boat House Repair" is one that done without having tools or the skills to do it properly.
August 20, 2022 at 6:29 am #264591Thanks for that info George. Very interesting! I like that eager font on the Speeditwin.
-
AuthorPosts
- You must be logged in to reply to this topic.