1950 Chris Craft Challenger water pump

Home › Forum › Ask A Member › 1950 Chris Craft Challenger water pump

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 30, 2025 at 1:33 pm #295003
    James McClymont
    Participant

      Canada Member

      Wondering why no evidence of water spitting out of the holes at back. Motor definitely running hot. Has a wobbler style impeller, does the impeller turn with prop shaft ? By fitting tight to cam lob on shaft ,or meant to float around in housing. Rubber feels hard ,and was replaced 30 yrs ago . Any source for replacement? Any input would be greatly appreciated

      March 30, 2025 at 2:15 pm #295004
      Tubs
      Participant

        Here are a couple of links from the past about wobble pumps. Sadly, some of the individual’s who posted here have passed away.  ——   https://www.aomci.org/forums/topic/1948-sea-king-gale/  —–  https://www.aomci.org/forums/topic/elgin-3-5-hp-year/  ——-

        A "Boathouse Repair" is one that done without having tools or the skills to do it properly.

        1 user thanked author for this post.
        James McClymont
        March 31, 2025 at 11:32 pm #295062
        joecb
        Participant

          US Member

          Brian Wilcox is the source for the impellor. His contact info is in the link that Tubs posted.

          Joe B

          1 user thanked author for this post.
          James McClymont
        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.