Home Forum Ask A Member 1953 Evinrude FastTwin 15hp

Viewing 10 posts - 1 through 10 (of 30 total)
  • Author
    Posts
  • #9259
    ko4nrbs
    Participant

      I’m not familiar with the 1950’s motors but have worked on the 1960’s models, 18 and 20 HP. I found a 1953 Evinrude FastTwin 15hp in nice condition and was thinking it would be a good lake fishing motor on a 14 foot aluminum vee hull. Is this motor a good candidate for that?
      Bill

      #71270
      nj-boatbuilder57
      Participant

        Is it a 15012? A 15 HP ’53 is a "Super Fastwin"….and it’s a particularly awesome engine. On a small, light aluminum boat, it will scoot you along quite nicely.

        Enjoy!!

        1 user thanked author for this post.
        #71274
        jeff-register
        Participant

          US Member - 2 Years

          AT 67 POUNDS very nice mtr, have had one from the 80’s & parts to build a new one. Easy to tune, it doesn’t have the round I.D. on the side of the block & good idling, or a 13,

          #71277
          david-bartlett
          Participant

            Great motors. Parts are available, they are easy to work on, and go like Stink on the right boat. Will troll very nicely also. I searched for one for quite a while and got one in a box, but it turned out great.

            My Grandkids will inherit this one.


            Attachments:

            #71279
            olcah
            Participant

              US Member

              David,
              Great Job! Love the paintwork.
              Charlie

              #71280
              david-bartlett
              Participant
                quote OLCAH:

                David,
                Great Job! Love the paintwork.
                Charlie

                Duplicolor from O’Reilly’s! 😎

                #71282
                garry-in-michigan
                Participant

                  Lifetime Member

                  One of My favorites – and quite popular . . . 😆








                  #71286
                  outbdnut2
                  Participant

                    US Member

                    Great motors!

                    These 1955s followed me home last spring. I’m thinkin’ of putting them on as a dual setup on a ’57 Crestliner Viking14 that I have…..just because I can! One of the tanks is not correct, and one needs the lower gears and prop, but I’ve got lots of parts motors and tanks.
                    Dave

                    #71287
                    fisherman6
                    Participant

                      US Member - 2 Years

                      These are great motors! I dont have a ’53 but I have two ’54s and they excellent. Both of mine are well used. One hasnquite worn original paint and the other someone repainted and used some later decals on, but it looks decent. They will push me in my 14 foot Sean Nymph 14R at around 20-21mph and will idle down to a crawl. Great running motors and lots of power for the weight. I really enjoy mine.
                      -Ben

                      OldJohnnyRude on YouTube

                      #71300
                      ko4nrbs
                      Participant

                        Thanks everyone. I’ll go pick it up soon and go through it.
                        Bill

                      Viewing 10 posts - 1 through 10 (of 30 total)
                      • You must be logged in to reply to this topic.