1955 Evinrude 15014 15 hp

Home › Forum › Ask A Member › 1955 Evinrude 15014 15 hp

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 22, 2019 at 12:20 pm #174238
    mercuryman
    Participant

      Can you change the upper crank seal with out spiting crankcase? Any one know the SKF number for seal ?

      Thanks

      April 22, 2019 at 12:40 pm #174239
      frankr
      Participant

        US Member

        15014 has a carbon seal. It just lifts out.

        EDIT: Oops, depends on serial number. Later ones used a conventional seal 303804. Some people dig them out. Other people invest in the special puller. http://www.richardsoutboardtools.com Or split the case.

        6.-Crankshaft-and-Piston

        • This reply was modified 5 years ago by frankr.
        April 22, 2019 at 12:57 pm #174243
        mercuryman
        Participant

          My serial # is 17923 and there is no washer or spring it looks like regular seal so it must 303804.

          Not much room there to dig out.

          Thanks for info Birney

          April 22, 2019 at 1:14 pm #174244
          RICHARD A. WHITE
          Participant

            Lifetime Member

            Birney,
            That seal puller will cover 18-35 hp motors. Since the later serial numbered 15hp had the upgraded seals this will work for those.
            Richard

            http://www.richardsoutboardtools.com
            classicomctools@gmail.com

            May 1, 2019 at 9:56 pm #174652
            1957evinrude
            Participant

              US Member

              I would get the tool to avoid any possible damage trying to remove it. Very easy with the tool.

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.