1960 2hp west bend compression test

Home › Forum › Ask A Member › 1960 2hp west bend compression test

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 29, 2024 at 2:26 pm #285405
    Hiawatha
    Participant

      US Member

      got 45lbs, what should it be? also dark oil coming out of water tube while running weak, looks like gotta dig into motor, feedback, ballpark diagnoses?

      February 29, 2024 at 6:04 pm #285415
      Buccaneer
      Participant

        US Member

        My 1956 West Bend 2 hp had 52 psi compression.
        After I de-carboned the rings and lightly honed
        the cylinder, it went back up to 60 psi where it
        ran pretty fair.

        Prepare to be boarded!

        March 1, 2024 at 6:30 am #285422
        Hiawatha
        Participant

          US Member

          thanks bucc, time to take apart the power unit

          March 2, 2024 at 1:45 pm #285463
          jeff-register
          Participant

            US Member - 2 Years

            Easy way to check low compression is bad idle. Buc has it correct. Many old motors were ran on car type oil as a premix before good 2 stroke came out & are very caroned up. Smaller bores are affected more it seems.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.