1964 6 -HP Sea King Seals

This topic has 1 reply, 2 voices, and was last updated 3 years, 4 months ago by seakaye12.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
September 7, 2021 at 10:45 pm #246333
outbdnut2
Participant
US Member
I’m working on a 1964 6 HP Sea King by West Bend/Chrysler for a neighbor that recently bought it for $50. I’ve got it running great but it needs new gearcase seals where the driveshaft and shift rod enter it. Prop-shaft seal is OK. Anyone know where to get these? If not, I’ll do some measuring and try to find seals with the same dimensions.

Dave
September 8, 2021 at 12:52 pm #246366
seakaye12
Participant
US Member
The manual I have is a year or two newer but might be the same; probably is.

Seal #50307; seems to be a National number..

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=50307+seal&_sacat=0

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=901618-2&_sacat=0&LH_TitleDesc=0&_odkw=50307+national+seal&_osacat=0&_sop=15
- This reply was modified 3 years, 4 months ago by seakaye12.
- This reply was modified 3 years, 4 months ago by seakaye12.
- This reply was modified 3 years, 4 months ago by seakaye12.
- This reply was modified 3 years, 4 months ago by seakaye12.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

GET IN TOUCH

© 2024 Antique Outboard Motor Club Inc. All rights reserved. Designed by Infinite Web Designs