Topic: 3 old outboards and no idea what to do with them.

This topic has 20 replies, 12 voices, and was last updated 8 years, 1 month ago by brooksdg.

Viewing 10 posts - 1 through 10 (of 21 total)

1 2 3 →

Author

Posts
October 25, 2016 at 10:22 am #5563
brooksdg
Participant
So I stumbled across this forum researching some old outboards my parents have had at their place for years. Mom now wants them gone. I know little about these motors to be honest. They were my grandfathers and were moved to my parents many moons ago and have been stored indoors. I’ve actually never seen them used, as we never had a boat small enough for them when I was growing up.

here is what I know about the motors from taking some pics and doing a google search. I was lookning for S/N but I’m not sure where to look on them. A couple of the #s I found didn’t match to anything. From oldest to youngest
* Martin "60" – Guessing a 60C from 46-48. Found another site that the carb # and control knob info matched.
* Scott 3.6 with McCullogh flying bird sticker – Haven’t found much on this one.
* Chrysler 6HP – there was an ID tag on this one that listed it as 62HB (*71) model. I’m not sure this one was ever put into use. the crank and starter gears little to no wear on them and when I popped the cover I was surprised how clean it was.

I’ve not started them but have slowly pulled the cord and both spin freely and aren’t seized. I guess I’m trying to figure out if there would be any interest in them or if they should just be scrapped. Here are some pics of each, any additional info on them would be appreciated.

Attachments:
October 25, 2016 at 10:27 am #46435
brooksdg
Participant
The Scott

Attachments:
October 25, 2016 at 10:29 am #46436
brooksdg
Participant
Chrysler

Attachments:
October 25, 2016 at 10:43 am #46437
ausob-collector
Participant
Hello there and welcome to the forum!

You have three very nice motors there, all in quite nice condition under the dirt. As they are all nice motors, I would strongly advise against scrapping them. They may not be worth as much as you may think but if you do want to sell them I would recommend maybe taking them along to a meet held by the closest AOMCI chapter. There you should be able to stir up some interest and end up with a buyer. I can vouch for everyone and say that if you do sell your motors to an AOMCI member, you can rest assured that they will be preserved and taken care of and not just thought of as ‘an old outboard that’s good for nothing’.

I think that out of your three motors, the Chrysler would probably be the most common one. Finding a Martin with the original manual I believe is something that doesn’t happen every day, and unfortunately I can’t say anything for sure about the Scott. Price wise, it’s hard to value something without actually seeing it, but I wouldn’t say that any of these motors are high up on the rarity scale as quite a few were made over their production runs.

You could always just keep the motors for yourself and get them running and use them on a boat – if you need any help or have any queries i’m sure someone here should be able to help you.

Hope this helps

Cheers
BP
October 25, 2016 at 12:24 pm #46439
fleetwin
Participant
US Member - 2 Years
Where are you located? I’m sure we can find some interested members in your area.
October 25, 2016 at 12:26 pm #46440
bigrichsoldoutboard
Participant
US Member
If you live by the NJ area I’m having a swap meet this Sat your welcome to bring them there and sell them go to the Events page of the AOMCI for more information an directions. Thanks Big Rich
October 25, 2016 at 12:32 pm #46441
brooksdg
Participant
I’m in MD and NoVA area. I’d probably do the meet if I didn’t have Saturday already locked up.
October 25, 2016 at 12:47 pm #46442
fisherman6
Participant
US Member - 2 Years
Too bad you aren’t closer to SE MI. I’d be interested in all three of them. Don’t scrap them. There is plenty of interest.
-Ben

OldJohnnyRude on YouTube
October 25, 2016 at 12:55 pm #46443
frankr
Participant
US MEMBER PAY BY CHECK
We avoid the term "scrap" around here. We are about restoration and preservation. OK, a junker might be parted out, but those aren’t junkers.
October 25, 2016 at 2:48 pm #46447
outbdnut2
Participant
US Member
You could post them for sale in a free ad here on our Webtervise Board and/or post on your local Craigslist. At the right price, they will sell. I’ve bought motors on Craigslist where the seller had no idea what they were worth and dropped the price $10/week until they sold. Another thought – some high schools teach small engines in shop classes. Often they accept donations and the classes learn from them. You don’t get money, but they are then tax deductible and you are helping out some kids! Some schools will take them, fix them up, and give them back , all for free, or for cost of parts.
Dave
Author

Posts