3 prong gas line to motor female connector

Home › Forum › Ask A Member › 3 prong gas line to motor female connector

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 16, 2021 at 2:28 pm #234006
    brian.moser@k12.sd.us
    Participant

      I have an Johnson javelin motor that has a male 3 prong gas connector and all of my connectors are only a female 2 prong. Can you still purchase or find a 3 prong connector or what are my options?

      March 16, 2021 at 3:27 pm #234009
      Ronaldu
      Participant

        Many of these are available from various members. Even and old one with leaky o rings can be rebuilt. I do not have any extra at this time. Swap meets and member events typically have some available. I am unaware of a new source

        March 16, 2021 at 5:17 pm #234011
        outbdnut2
        Participant

          US Member

          Another option is to add a fuel pump and then you can use the commonly available, single hose connector and tank. There have been a lot of posts here about how to put on a fuel pump. The Javelins were made in 1956 and 57. The dual hose pressure-tank was phased out, depending on the model, beginning in 1958, with all of them converted by 1961.

          Dave

          March 16, 2021 at 5:47 pm #234017
          frankr
          Participant

            US MEMBER PAY BY CHECK
            brian.moser@k12.sd.us wrote:

            I have an Johnson javelin motor that has a male 3 prong gas connector and all of my connectors are only a female 2 prong. Can you still purchase or find a 3 prong connector or what are my options?

            So do you have a pressure tank to go with that dual hose connector you are asking for?

            March 22, 2021 at 2:00 pm #234597
            brian.moser@k12.sd.us
            Participant

              Yes I do. I just need the one connector, but I believe I found one on Craigslist. I have purchased it with hope it will work with my motor.

              Another Question: Is it possible to fix a bent control wire that goes from my throttle back to the motor?

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.