57 Buccaneer 12 upper water tube grommet replacment

Home › Forum › Ask A Member › 57 Buccaneer 12 upper water tube grommet replacment

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 19, 2015 at 11:41 pm #1795
    willg
    Participant

      US Member

      Fired up my 57 Gale 12 last weekend and the upper water tube grommet is leaking water. Do I have to pull the powerhead to replace or just drop the lower unit? This motor has the water flush plug at the top of the exhaust housing, and the housing looks to be the same as my 1954 Super Fastwin.

      June 20, 2015 at 12:08 am #18457
      chris-p
      Participant

        Drop the gearcase.

        You will need to rig up a little tool to push it up. Grease it well first. I have a little push tool, sort of stepped, so I can push it up.

        Some models have a hole in the leg, right at the elevation of the grommet, so you can push a punch through, where the tab is, to ease in removal/install, but I cannot remember off hand if yours is one of those.

        June 20, 2015 at 2:55 am #18475
        willg
        Participant

          US Member

          On mine, I can clearly see the grommet.

          June 21, 2015 at 12:22 am #18526
          willg
          Participant

            US Member

            Here’s where it’s leaking:

            Here’s the upper end of the water tube and grommet visible:

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.