Elto Tank Repair

Home › Forum › Ask A Member › Elto Tank Repair

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 21, 2024 at 12:22 pm #287886
    sherbs
    Participant

      US Member

      I have a Elto Rudder Twin model C that has a solder repair filler neck that was soldered at a angle. Is there anyone out there that repair gas tanks?

      May 21, 2024 at 7:57 pm #287898
      bobw
      Participant

        US Member

        If there’s nobody in the club living close to you that could help out, you could take the tank to a radiator shop and they might be able to straighten things out.

         

        Bob

        1937 Champion D2C Deluxe Lite Twin
        1954 Johnson CD-11
        1957 Evinrude Fastwin 18
        1958 Johnson QD-19
        1958 Johnson FD-12
        1959 Johnson QD-20

        “Every 20 minute job is only a broken bolt away from a 3-day project.”
        "Every time you remove a broken or seized bolt an angel gets his wings."

        May 21, 2024 at 9:23 pm #287900
        The Boat House
        Participant
          There may be more going on there than it was just soldered in crooked. Didn’t come from the factory like that. Why was it disturbed. The solder joint shouldn’t be very large.  Is it a solid tank or does it show signs of being rusty?  Tubs.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.