Know what part number this OMC pump is and what the rebuild kit number is?

[mr-asa]

Trying to knock out a rebuild, not sure what year it is from, though

[Buccaneer]

Not sure I see the right diaphragm on this list…..

Prepare to be boarded!

[mr-asa]

Found a part number on the back, 304089
Not sure if that is for one part, or the entire assembly?

[bobw]

That number is the entire pump assembly.

Bob

1937 Champion D2C Deluxe Lite Twin
1954 Johnson CD-11
1957 Evinrude Fastwin 18
1958 Johnson QD-19
1958 Johnson FD-12
1959 Johnson QD-20

“Every 20 minute job is only a broken bolt away from a 3-day project.”
"Every time you remove a broken or seized bolt an angel gets his wings."

[Mumbles]

That’s an early 60’s style pump and I don’t believe rebuild kits are available for them. They seem to be fairly reliable and I have quite a few running motors with these style pumps still on them. If necessary, you could always cut a diaphragm for it.

http://www.pfs-ware.com/Parts/OllieParts.htm

[outboardnut]

click this link
https://www.aomci.org/forums/topic/have-you-ever-rebuilt-this-fuel-pump/

• This reply was modified 3 years, 5 months ago by outboardnut.

[crosbyman]

some folks apparently use nitrile from nitrile gloves.

Joining AOMCI has priviledges 🙂

[mr-asa]

outboardnut wrote:

click this link
https://www.aomci.org/forums/topic/have-you-ever-rebuilt-this-fuel-pump/

• This reply was modified 3 years, 5 months ago by outboardnut.

Awesome. Thanks a ton for that.

[Author]

Posts