Mercury 1946 KD-3 parts book wanted

[daytonajohn]

HI.  My project is a 1946 Mercury KD-3. It is a single cylinder 3.2 HP model.    I have only a couple of photographs of the exploded parts pages. I don’t have any of the pages opposite the exploded view that has the part numbers and names of the parts. I prefer a parts book that has the revised and upgraded parts numbers.  For example the lower unit parts page I have shows the propeller shaft seal as M-50-140  but the modern number is 26-22058. Can anyone steer me to where I can see this exploded parts book online or get a copy of it ?  Thanks, John Timmins / DaytonaJohn

[jeff-register]

I have a C.D. of old Mercury model parts. I haven’t looked for it for years now. If I can find it I will figure a way to e mail to you or copy the disc on my computer & send it to you, if I can find it. I am very handicapped in a wheel chair so it will take some time. I’ll look tomorrow after I get grocerys.

E mail me at jeff.50@cox.net please,

Jeff

[seakaye12]

Another source might be the Western New York Chapter’s website.  Check Here:

http://www.wnyaomci.org/manual.html

[daytonajohn]

So far I have found the parts conversion book that translates the old parts numbers to the newer parts numbers and that’s a big help. What i really need now is the parts pictures in the exploded parts drawings and the page opposite that has the part number and the names of the parts for a 1946 KD-3. Then I can start part searching using my usual places. thanks, John

[jeff-register]

Sotty I’ve had house problrms, My air cpnditioning broke then my fridge. Ill look for that disc today. I live in the desert where it’s over 110 degrrees every day.! sometimes 122 degrees!

[jeff-register]

john,

I found my disc on Merc’s, It shows K4,  K5, KB5, KD4-1, KD4-2, & KD4-3 . What model exactly do you have? What exactly do you need as far as pages of exploded parts or  part numbers old or superseded? Send me a message here with your e mail & I can forward from the disc to you. I’ll get back to you tonight. Good ;uck with your project!P.S. Give me your serial number to I.D. your motor exactly for you in the e mail please..

Jeff

 

[daytonajohn]

Jeff, I have a 1946 KD-3 with the Scintilla ignition. Offhand I don’t know the serial number.  The only thing I need are ALL the exploded parts pages for that model with the pages opposite with the parts names and numbers either original or the newer numbers.  My email is racefan9@cfl.rr.com.

I’m sorry your a/c and refrigerator are sick. Hang in there!  John

[jeff-register]

Guys It’s been 118 degrees here. I found my disc but I need to download it to my computer because it’s copy protected then download to another disc to send to you. My brother knows how to do this & he will be here on the first of August. He lives 100 miles from me. You do need to look up your serial number because the updates & changes to your KD-4 as there is many improvements listed. Sorry it’s taking so long as the fridge man will be back today to install the parts. I’m lucky I have two fridges so all I did was transfer the stock, now to do it again. I’m not that good with a computer to do the proceedure unless someone here will instruct me how with windows 7. I know an old system!! I can view everything on the disc just can’t get it on my hardrive to recopy  or send to my E Mail.

[jeff-register]

John,

I managed to print the exploded parts view with the parts page related to the diagram. There are 27 pages so I can either scan & send 27 E mails or send the papers to you. Let me know which you want. I hope I can just send the papers of everything on your KD4, I tried printing just a few pages & it printed everything on the KD4.

Jeff

[daytonajohn]

My project motor is a KD-3 serial number 108525.   I don’t have a KD-4.   It would be nice to have that information to share with others, but there’s no rush! Please take it easy  !

[Author]

Posts