Mercury KD4

Home › Forum › Ask A Member › Mercury KD4

Viewing 10 posts - 51 through 60 (of 140 total)
1 2 3 … 5 6 7 … 12 13 14
  • Author
    Posts
  • January 29, 2021 at 11:07 pm #229065
    Boonie
    Participant

      Canada Member

      Where can I find part # M-50-110 for my Mercury KD4. It’s the drive coupler.

      January 30, 2021 at 12:55 am #229069
      opposedtwin
      Participant

        US Member

        Buc,
        The Winnebagoland chapter has been kaput for over a year, maybe two. Thus the loss of a relevant site.
        Scott

        January 30, 2021 at 1:07 am #229070
        opposedtwin
        Participant

          US Member

          Boone, that’s the rubber clutch in the propeller. Tom T should have one for you. His contact info is already in this thread somewhere.

          Scott

          January 30, 2021 at 10:20 am #229083
          Boonie
          Participant

            Canada Member

            So here’s my issue. The one on the left is obviously the original messed up one. I bought the one in the middle from eBay. It is supposed to be for a KD4. Problem is that it is to thick and I can’t put the shear pin in . Is this possibly for another model?

            January 30, 2021 at 1:20 pm #229091
            Boonie
            Participant

              Canada Member

              Has anyone used fergusonpoolemarine for parts?

              January 30, 2021 at 2:05 pm #229092
              opposedtwin
              Participant

                US Member

                Yes! Joe Poole is one of the most stand up fair guys you’ll ever do business with. I rate him at a perfect 10. Have bought parts from him many times over the years and have NEVER been disappointed. He’s super detail oriented, very knowledgeable and responds promptly to all communication.

                January 30, 2021 at 4:30 pm #229098
                dave-bernard
                Participant

                  US Member

                  what is stopping the shear pin from going in. is it to long to fat what ?

                  January 30, 2021 at 7:14 pm #229121
                  Boonie
                  Participant

                    Canada Member

                    When I put the clutch over the shaft it doesn’t clear the hole for the pin to go in. Make sense? I can try to post a picture.

                    January 30, 2021 at 7:25 pm #229123
                    dave-bernard
                    Participant

                      US Member

                      the pin goes in then the clutch drive goes on. then second half if the clutch then prop then nut and washer and cotter pin. send pics if you can. 1 914 310 7086

                      January 31, 2021 at 9:15 am #229153
                      Boonie
                      Participant

                        Canada Member

                        What is the second hole for if not a pin?

                      • Author
                        Posts
                      Viewing 10 posts - 51 through 60 (of 140 total)
                      1 2 3 … 5 6 7 … 12 13 14
                      • You must be logged in to reply to this topic.