Topic: Need help identifying – Antique Outboard Motor Club,Inc

This topic has 21 replies, 8 voices, and was last updated 6 years, 4 months ago by garry-in-michigan.

Viewing 10 posts - 1 through 10 (of 22 total)

1 2 3 →

Author

Posts
July 24, 2018 at 1:59 am #10649
alanp
Participant
US MEMBER PAY BY CHECK
I picked this up yesterday and the only stamp I can find on it is A44G. I was hoping I could get some help identifying it.
Thanks
Alan
July 24, 2018 at 2:01 am #79999
alanp
Participant
US MEMBER PAY BY CHECK
Here are photos

Attachments:
July 24, 2018 at 2:13 am #80000
alanp
Participant
US MEMBER PAY BY CHECK
Couple more photos

Attachments:
July 24, 2018 at 2:29 am #80002
Buccaneer
Participant
US Member
circa 1928 Speeditwin?

Prepare to be boarded!
July 24, 2018 at 7:34 am #80007
garry-in-michigan
Participant
Lifetime Member
1929 Fastwin ? ? ? . . . . 😕
July 24, 2018 at 8:29 am #80009
lyks2tinkr
Participant
US Member
A mixture of a 29 Speeditwin with a 28 exhaust and homemade exhaust tube ?
I have a 29 in the basement I’ll look at shortly.
July 24, 2018 at 12:09 pm #80011
george-emmanuel
Participant
US Member
It is later than ’29 based on the manifolds. What does the model/serial number say?
July 24, 2018 at 12:46 pm #80014
alanp
Participant
US MEMBER PAY BY CHECK
I can’t find any model or serial number tag. The only numbers stamped on it are A44G.
July 24, 2018 at 1:06 pm #80015
lyks2tinkr
Participant
US Member
I thought later 29 speeditwins all had the cast exhaust/muffler.
Is there a casting number visible on the carb?
My model 143 29 Speeditwin has an MS11Y on the carb starboard side.
The ID tag if it has one should be on the starboard side of the transom clamp.
July 24, 2018 at 1:10 pm #80016
lyks2tinkr
Participant
US Member
Perhaps a home brew racer. The prop has a pretty good pitch to it.
Author

Posts