Suters Meet

Home › Forum › Ask A Member › Suters Meet

Viewing 10 posts - 1 through 10 (of 12 total)
1 2
  • Author
    Posts
  • October 13, 2016 at 6:57 pm #5489
    chris-p
    Participant

      Considering going to Suters meet this Saturday. I have never been so was hoping for some information. Start time, address, etc…

      I would be making the drive down from Ontario, so would likely stay overnight.

      Thanks.

      October 13, 2016 at 7:04 pm #45785
      RICHARD A. WHITE
      Participant

        Lifetime Member

        4368 Braden Road
        Byron Michigan
        48418

        Not sure where the nearest town would be for overnight stays…Wear something that stands out so I can swing by and say hi 🙂

        I will be probably wearing an Ohio State shirt or sweater of some sort.

        Cya there

        Regards

        Richard

        http://www.richardsoutboardtools.com
        classicomctools@gmail.com

        October 13, 2016 at 7:31 pm #45789
        fisherman6
        Participant

          US Member - 2 Years

          I believe the meet is from 9:00am until 3:00pm. I’m planning to be there at 9:00. Are you crossing into the States at Windsor or Sarnia? Someplace near Fenton or Linden is likely a decent place to find a room. I’d probably not stay in Flint but that’s just me. Maybe Howell if you are crossing thru at Windsor – Detroit.

          I’ll probably be wearing my black baseball cap from the Tomahawk meet this year and some kind of sweatshirt at least until it warms up a bit. If you see me say hi.

          Richard, I’ll be looking for the Buckeye shirt. 😉

          -Ben

          OldJohnnyRude on YouTube

          October 13, 2016 at 9:06 pm #45797
          chris-p
          Participant

            Ok thanks guys.

            I would likely cross in sarnia? I would be coming from east of both cities, so could come through either one, depending on which one is closer to the meet.

            Im 6’7", so not hard to miss!

            October 13, 2016 at 9:09 pm #45798
            RICHARD A. WHITE
            Participant

              Lifetime Member

              Hmm @ 6′ 5" I gotta look up?? That don’t happen often! LOL

              http://www.richardsoutboardtools.com
              classicomctools@gmail.com

              October 13, 2016 at 9:24 pm #45802
              pm-t2
              Participant

                Canada Member - 2 Years

                Bruce Reinhart is attending, he lives in Kitchener, might want to check with him on which route he takes, I think he does enter the USA at Sarnia/Port Urine

                Hope this helps.

                Best,
                PM T2

                October 13, 2016 at 10:41 pm #45807
                green-thumbs
                Participant

                  US Member - 2 Years

                  I am from Port Huron so my route is West on I-69 to Bancroft then a few miles on (paved) back roads with several turns. A Garmin navigator will earn its keep. Observe speed limit signs in Bancroft area. There are several. Once you have arrived you will be signed in and directed to a parking area or vendor area depending on whether or not you have something to sell/swap. A lot of super restorations, parts and projects and the opportunity to let less loved items find new homes. Be sure to tour the "Museum", Mark’s workshop and say hello to our hosts…
                  Elaine, Mark and their family.
                  Louis

                  October 13, 2016 at 11:19 pm #45808
                  Pondrocket
                  Participant

                    Lifetime Member

                    I’ll be there looking foreward to seeing all.

                    Travis

                    Travis
                    AOMCI VP Communications
                    AOMCI Webmaster
                    webmaster@aomci.org

                    October 13, 2016 at 11:52 pm #45814
                    chris-p
                    Participant

                      The museum is one of the main reasons I want to go! Been drooling over his pictures online for a while.

                      October 14, 2016 at 12:22 am #45816
                      fisherman6
                      Participant

                        US Member - 2 Years

                        Mark’s collection / museum is something to see. I was there for the first time last year with my then 6 year old daughter. I didn’t get to look very closely in there. I’ll look a bit closer this year since my daughter has other plans this year.

                        I’ll be looking up at Chris P and Richard White… I’m only 6 foot nuthin on a good day. Looking forward to seeing you guys there.

                        -Ben

                        OldJohnnyRude on YouTube

                      • Author
                        Posts
                      Viewing 10 posts - 1 through 10 (of 12 total)
                      1 2
                      • You must be logged in to reply to this topic.